Showing posts with label collaboration. Show all posts
Showing posts with label collaboration. Show all posts

July 4, 2015

Arc Fixture with Vines and Leaves

One of the very first collaborations I created with David Little was based on a simple horizontal arc shape, with shades suspended below. I think we have made perhaps 6 or 8 pieces based on this single idea. This Spring, we have been working on three new projects that are based on the Arc concept, but take it to new places. We built one that is over a kitchen island near Conway, NH that is called "The Tilted Arc." As the name implies, the Arc is twisted out of the vertical plane, which allows the three small shades that hang from it to follow the shape of the counter. I hope to have pictures of this soon.

We are about to install another Arc-based project that goes over a dining table in Boston. This room has an 11" high ceiling, and to fill that high space, this project had a longer lower arc, and above that is a shorter arc. Again, we should have pictures of this completed piece when it gets installed in late July.

The third project was put up a few weeks ago, and again it is based on the Arc design. But this time it has a unique-to-me ornamentation elements in the form of vines and leaves that wind around the Arc form. This complements other wrought iron pieces in the home that have botanical design elements.


The closeup below shows the elegant and natural way the vine wraps around the Arc shape. And interestingly, the leaves are Aspen leaves, the same wood as the shades are made from. It all goes together and makes sense.


Dave works in this general style very regularly (check out his website to see a lot more of his own work: http://www.irontable.com. This new piece opens up a lot more possibilities for Dave and I, where we integrate both of our design styles in to single projects.

One more interesting part of this Arc With Vines and Leaves project is that the wood for the two outer shades came from the client's own land. Last Autumn, I cut down a tree on their property, and made a total of four shades for them. Two are incorporated in to the project for their kitchen, and two are part of Shepherds Crooks that hang over their bed. I love projects like this, where there is a sense of alpha-to-omega, there is a history of the wood that begins at the tree.




July 30, 2012

"Orbs" collaboration with Paula Barry


Each year, a focal point of my creative intentions is directed towards the Living With Crafts exhibition at the League of NH Craftsmen's Annual Fair (aka "Sunapee"). The event runs from August 4-12, with a preview party on Friday evening, August 3. This year, I have two pieces that were accepted for the display, and both of them are collaborations. And all collaborations have a story! In this blog entry, I will tell you about the piece done in conjunction with the ceramic artist Paula Barry. http://paulabarryceramics.com
The story began last summer, when my wife Kathy saw the Sculpture Garden at the Sunapee craft fair, and came back to my booth, recommending I go see some ceramic garden sculptures. I did, and instantly started to see the forms as a starting point for a lamp base for my wood shades. By coincidence, it turned out that they were made by Paula Barry, and that her booth at the fair was in the same tent as mine. Paula and I chatted during the rest of the show, and made a tentative plan to submit a collaborative piece for Living With Crafts in 2012.
Our first idea was to make a floor lamp. using a stack of Paula's elliptical hollow forms, which I started to call "orbs." The idea was to alternate ceramic and wood orbs in a tall column. Later on, I realized that the weight of the entire piece, and the forces that could torque on the ceramic forms, could make the piece a bit fragile. So we switched to the concept of making table lamps. I sketched some ideas which I submitted to the Living With Crafts selection jury, and which were accepted. 
Once we got the go-ahead, Paula responded quickly by making about 30 orbs, all different colors and with a variety of carved patterns. She brought them to New London, and we had a fun time playing, stacking them up in to various sets, trying to find the best combinations of colors and graduated sizes. We ended up with four sets we liked, and over the next couple of months, I made up the lamp bases from the sets. Each lamp base has a larger solid wood orb-like shape at the foot, five of the ceramic orbs in a stack, topped by a smaller wood "neck," which serves the purpose of allowing the shade to set a bit higher, thus allowing the viewer to see all of the ceramic parts. Once the bases were all made, I started matching them up with shades that I had already made. Since the table lamp bases are relatively tall (about 19") and have substantial visual mass, they seem to look best with fairly large shades, typically about 17-18" in diameter. Once the four lamps were completely set up, I took high quality formal pictures which you can see at the bottom of this blog entry.
These collaborative lamps are part of a longer-term exploration that has to do with stacked round shapes. My blog entry for July, 2010 is about my Bryce Canyon floor lamp base (http://woodshades.blogspot.com/2010/07/bryce-canyon-floor-lamp.html), and if you read that you will see references to the amazing hoodoos at Bryce, as well as the Gaudi cathedral in Barcelona, and the drip forms that are sometimes part of sand castles. Since then, I have also connected the basic idea to rock cairns that are used to mark hiking trails in the mountains, and some of the environmental sculptures made by Andy Goldsworthy. Nothing I am creating in wood, or using the ceramic orbs, is exactly modeled on any of the visuals. See this link to a photo gallery to see a collection of images that relate to the stacked form concept http://woodglow.smugmug.com/Art/Inspirations/24462429_JPtF3c#!i=1995750104&k=n2sfW5X.


November 13, 2011

SunDrops: another new collaboration with David Little

David Little is a fantastic blacksmith in Meredith, NH. You can see older posting on my blog about other pieces we have done together. He and I began collaborating in 2004, and almost every year since then, we have come up with new projects to create together. Some are commissions for clients, and some are for exhibitions. This summer we premiered an entirely new design concept for the Living With Crafts exhibit at the League of NH Craftsmen's Annual Fair at Sunapee, NH.

It began as a drawing I made five or six years ago, but we never actually built it. I have always liked the concept, but since it is more three dimensional than our other pieces, the sketch could not do justice to the essential forms, so we never got a client interested in commissioning this piece. This year, we took the leap of faith to build it for the LWC exhibit, and it could not have been a bigger success. David and I love the way it came out, and it opens up a whole new branch to our growing portfolio of designs. It also won two prestigious awards at Living With Crafts: Best Collaboration, and Best in Contemporary Design. There were so many amazing pieces in the exhibition, so we are honored to be selected by the jurors.


An interesting bit about how the design evolved: the original drawing was quite a bit taller and proportionally narrower, and that form is equally dramatic. But it would only be appropriate for a room with a very high ceiling. In coming up with the final drawings for LWC, it was obvious that it needed to be re-scaled to suit the exhibition hall. In doing that, we realized it could easily be scaled in many ways: wider or narrower, taller or shorter, and with shades as small as 10" diameter or as large as 18." All the variations we played with looked good! What we settled on is a fairly small rendition, which was appropriate for the space and also the Terry Moore Table over which it was going to be placed.

When we had it all built, we realized it needed a name. Originally we had been referring to it as "Tri-Icicles,"
which made more sense when it was a much taller form. But in this shorter configuration, it looked less like icicles. And when the shades were suspended from the steel and lit up, the coloration and glow was so much warmer feeling than anything having to do with ice and winter. Although it is not literally mimicking any natural floral form, it seemed reminiscent of something growing and organic. Suddenly the word "SunDrops" came to
mind, and that title resonated instantly. Now we couldn't imagine it being called anything else!

One other note about this piece. Working on two dimensional paper to draw three dimensional forms is limiting. The interplay of lines sweeping through space is entirely different depending on what angle the piece is seen from. And even if I can imagine what the lines on the paper mean when it is translated to three dimensions, it is far from an ideal way to present to a prospective client – the dynamic range of dancing shapes is confusing and ambiguous. So I am now learning how to make 3D models out of copper wire and tubing, annealing the metal so it bends sinuously, and soldering the joints. I still have to work out some tricks for how to hold the odd shaped pieces together while I solder, but the process of bending and arranging the components is fascinating. Just a simple thing like taking three arc-shaped elements and holding them together in different ways provides for infinite choices. The aesthetic and functional results are fascinating. I have no doubt that this new way of designing is going to open up a lot of new project opportunities.


June 4, 2009

Collaboration with Sharon Dugan

At long last, I am back to blogging, with a number of ideas of what to say. Sorry about the hiatus!

Sharon Dugan is a truly fantastic basketmaker, who I have known thru the League of NH Craftsmen for perhaps 15 years. I have always admired the intricacy of her work, and her aesthetic vision. She has a commitment to doing things right, by hand, by herself that I respond to strongly. This winter, I proposed to her that we do a collaborative effort for the upcoming Living With Crafts exhibit. We came up with a plan for a matched pair of table lamps. I turned a couple of columns of wood, and she created a woven splint design to cover those columns.

Now that she has completed her work, I have created bottom-disk and top-cap parts and assembled the entire bases. Still to come are the matched shades, but I have temporarily put a shade on one base to give a good idea of what the whole piece will look like when the pair is exhibited at the show in Sunapee, NH from August 1-10.

FYI, the pair is available for $4000 for the set. If they do not sell together, they can be purchased individually at the end of the exhibition. We are very excited about the results of this collaboration and would entertain other commissions in this general style.

Click on the title of this blog posting "Collaboration with Sharon Dugan" to be taken to her web site. It is www.sharondugan.com